Opens in a new tab

What a made-to-size duct is, and when you need one

MD
Malcolm DengProject Manager, Wee Seng Engineering
Duct sections being folded in the Sin Ming workshop

Many exhaust jobs can use a standard flexible duct from the hardware shop. Some cannot. When the route is long, tight or awkward, a duct made to the exact size of the space works better and lasts longer.

The short answer

A made-to-size duct is cut and folded from galvanised steel to fit one specific route: the right width, the right length and the right bends. You need one when a standard part leaves gaps, sags, or would have to be forced into place.

Tip from the workshop

Every bend slows the air down. A made-to-size duct can take the shortest route with gentler bends, so the fan works less hard.

Made-to-size vs flexible duct

Made-to-size galvanised Flexible duct
Fit Cut to the exact route Stretched or squeezed to fit
Airflow Smooth inside, steady flow Ribbed inside, more resistance
Grease and heat Handles both well Can sag and trap grease
Lifespan Long Shorter, can tear
Best for Shops, long or tricky routes Short, simple home runs

How we make it

We measure the route on site: the space, the obstacles and the fan size. The duct and fittings are then cut and folded in our Sin Ming workshop and brought back to fit. Joints are sealed so air and smell only leave where they should.

Bolted galvanised duct joint, sealed so air only leaves at the end

When you probably need one

  • The route has to turn around beams, pipes or a false ceiling
  • The duct size does not match a standard part
  • A shop or stall kitchen with heavy grease and heat
  • An old duct is leaking at the joints
  • A new hood or fan has a different outlet size

Quick checks you can do yourself

These help you describe the job when you ask for a quote.

  • Measure the outlet. Note the size of the opening on the hood or fan.
  • Follow the route. Note where the duct has to go and what is in the way.
  • Look for leaks. Grease marks or smell near joints mean the old duct is not sealed.
  • Count the bends. More than two or three on a short run is worth rethinking.

Rather not do it yourself?

We’ll measure it and make it, at a fair price.

Send 2 or 3 photos of the start and end of the route and anything in between. We tell you what the duct needs and what it costs, then make and fit it ourselves.

The easiest next step

Take photos of the hood or fan, the wall or window where the air should leave, and the ceiling in between. Send them on WhatsApp and we will tell you whether a standard part will do or a made-to-size duct is the better fix.